Product Assembly PSA hot melts (pressure sensitive adhesives) |
Pressure sensitive adhesives are often used for product assembly purposes, to assemble products which has to remain on their position during production, and support the products design and structure during it's lifetime. Using hot melt adhesives provide the most efficient production method in comparison to welding, bolting or binding. Some general characteristics of hot melt:
Applications
EHM 9014 is a high performance hot melt pressure sensitive adhesive that has been formulated for permanent self-adhesive machine applied labels
Special features
EHM 9014 PSA hotmelt has good adhesion to paper and plastic label stock and gives no residual staining to paper label stock. It is formulated to give clean die cutting at high line speeds.
EHM 9014 gives permanent label adhesion to a wide range of container materials. Its high tack allows good label register on the container
Many products are available from stock at Intercol, and our leadtime is short. BEcause of our efficient production planning, and large production facilities. Due to upskaling in large mixers, up to 20MT, where we start from 100Liters.
TECHNICAL DATA SHEET Hot melt adhesive Pressen EHM 9014
TDS/ EHM 9014 |
Test Methods |
Typical Value |
Rolling Ball Tack |
PSTC-6 |
4mm |
Loop tack |
FTM 9 |
18 N - 18gsm |
180° T-Peel. |
QA413P |
9 N/25mm - 18 gsm |
Heat resistance |
SAFT |
75°C - 18 gsm |
Colour |
Visual |
Pale Amber |
Viscosity |
BAQA101 |
8500 cP @180°C |
Softening Point |
BAQA102 |
106°C |
Form |
N/A |
Blocks/Drums |
|